boat trailer tire flatA boat trailer tire jack is one of the more important pieces of equipment a boat owner can have, especially if transporting the boat often throughout the year.  Without a boat trailer tire jack, boat owners run the risk of being stranded at the side of the road and at the mercy of a good cell phone signal and tow truck operators, who can charge quite a hefty penny to come out and change a tire on a trailer that is supporting a heavy boat. If you own a boat and haul it on a trailer, what would you do if your boat trailer got a flat tire while transporting it? Are there any stretches of road on your route where you would really rather not get a flat tire and have to wait for an hour or more for a tow truck to come to your rescue?  How about having your own boat trailer tire jack that would have you back on the road in less than 5 minutes?

Changing a flat boat trailer tire

With Ready Jack, changing a boat trailer tire is really quite easy and just about anyone can do it.  If you can turn a lug nut wrench to loosen the lug nuts, then you can use the Ready Jack.  There is no other boat trailer tire jack out there that is as easy to use and as safe to use as the Ready Jack to change a flat tire on a boat trailer.

The first thing you want to do is to practice safety. Try to park your vehicle and trailer on flat ground.  Make sure that the boat is properly secured on the trailer.  If your trailer is not attached to the tow hitch on your vehicle, you should do so. Even if your trailer does not have a load on it, you should attach the trailer to your tow hitch to for adequate stability.  If you are parked at the side of the road, make sure that you are parked a safe distance from the traffic that is going by you.

Easy lift boat trailer tire jack

Lifting the trailer with the Ready Jack is one of the easiest parts of using this boat trailer tire jack.  After you follow the step described above, all you have to do next is pull the pin that secures the Ready Jack to the trailer.  This allows the Ready Jack to position itself to the ground and it is now ready to lift the trailer. It is a good idea to loosen the lug nuts half a turn at this point. Next, simply drive your vehicle about a foot or so.  You only have to move it enough that the wheel is high enough to be removed and the new wheel installed. You have just lifted your trailer  with the easiest to use boat trailer tire jack.

Now, set your parking brake and place wheel chocks in front of and behind the wheel on the opposite side of the flat tire. Now remove the lug nuts from the wheel. Remove the flat tire and replace it with your new wheel.  hand tighten the lug nuts  and then tighten them with a lug nut wrench using a star pattern.  This helps assure square seating of the wheel on the axle.

Lower the boat trailer

After you have tightened  the wheel onto the axle, it is time to safely lower the boat trailer.  To do so, remove the wheel chocks and release the parking brake.  Next, slowly move your vehicle in the opposite direction that you went to raise your boat trailer.  Once your trailer is flat on the ground, stop your vehicle, put it in park and set your parking brake.

All you have to do now is raise the Ready Jack high enough to insert the pin, which holds the Ready Jack in position. Once you have done that, you are ready to get back on the road and on your way.

The best boat trailer tire jack

Clearly you have seen just how easy the Ready jack is to use.  If you find yourself with a flat tire while you are towing your boat on a trailer, you can change the flat tire and be back on your way in as little as 5 minutes. Also, very little physical exertion is used.  The hardest part is loosening the lug nuts and that has to be done no matter which kind of trailer jack you are using.  To purchase the Ready Jack, go to our shop and get your today!